
Order a pallet with the wrong dimensions, and suddenly the shipment no longer fits cleanly into the container or onto the rack slots it was planned for. Anyone sourcing or shipping internationally runs into the Euro-pallet as the standard reference sooner or later.
In brief: The Euro-pallet measures 1,200 x 800 x 144 mm and weighs around 25 kilograms. Under the EPAL standard, it carries a load capacity of 1,500 kilograms, and is certified under EN 13698-1 and UIC 435-2. Only pallets bearing genuine EPAL markings are part of the European pallet exchange pool. An unmarked pallet with the same dimensions isn't automatically included.
The Euro-pallet (officially EPAL 1) measures 1,200 mm in length, 800 mm in width, and 144 mm in height. These dimensions are standardized across Europe and form the basis for practically every calculation in warehouse and transport logistics, from rack planning to truck slot calculations.
The standard 144 mm height applies to the empty pallet itself, not to the goods loaded on top. How much additional load height a vehicle allows is governed in Germany by the CCG1 and CCG2 standards, which are set independently of the pallet's own dimensions.
An empty Euro-pallet weighs around 20 to 25 kilograms in practice. EPAL itself gives a guideline figure of about 25 kilograms for a new pallet. Weight varies downward mainly with wood moisture and wear, but it still plays a real role in freight calculations: across a shipment with many pallets, the pallets' own weight alone quickly adds up to several hundred kilograms of extra load that has to be accounted for in a container's or truck's weight calculation.
A Euro-pallet's load capacity depends heavily on how it's loaded. According to EPAL, the regular safe working load for a single pallet standing on its own is 1,500 kilograms. When several laden pallets are stacked on solid, level ground, EPAL specifies that the bottommost pallet may carry the combined load of every pallet stacked above it, up to a total of 5,500 kilograms.
In practice, a single pallet's load capacity is often further broken down by use case, as rajapack.de explains:
Scenario | Guideline value | Explanation |
|---|---|---|
Static (single pallet on the ground) | up to approx. 4,000 kg | Pallet stands alone, load evenly distributed |
Dynamic (in motion, e.g. by forklift) | approx. 1,000–1,500 kg | Movement adds extra forces on the structure |
Racking (in high-bay racking, supported only at the edges) | up to approx. 1,000 kg | Deck bears the load without support in the middle |
The 4,000-kilogram figure applies to a single pallet on its own; the 5,500-kilogram figure from the previous section is for the bottommost pallet in a stack, which also carries the weight of every pallet above it. Racking adds a third constraint: the pallet is often supported only along two opposite edges there, so the deck in between has to withstand significantly more bending stress than it does resting on solid, continuous ground.
In our projects, pallet weight is a factor that regularly gets underestimated when calculating ocean freight containers. Across a full row of pallets, the empty pallets alone can eat up several hundred kilograms of the allowable payload, which becomes relevant fast for weight-critical goods like metal parts and reduces the actual amount of product that fits in a given container.
Alongside the standard Euro-pallet (EPAL 1), there are other EPAL load carriers with different dimensions and load capacities, per the official EPAL overview:
Type | Dimensions (L x W x H) | Load Capacity |
|---|---|---|
EPAL 1 (Euro-pallet) | 1,200 x 800 x 144 mm | 1,500 kg |
EPAL 2 | 1,200 x 1,000 x 162 mm | 1,250 kg |
EPAL 3 | 1,200 x 1,000 x 144 mm | 1,500 kg |
EPAL 6 (half pallet) | 800 x 600 x 144 mm | 750 kg |
EPAL 7 (half pallet) | 800 x 600 x 163 mm | 500 kg |
For European goods traffic, EPAL 1 is by far the most widely used type. The half pallets EPAL 6 and 7 mainly come into play for smaller shipments or in tight warehouse spaces where a full Euro-pallet would be too large.
Not every pallet measuring 1,200 x 800 mm is a genuine EPAL pallet. The marking is what matters: an original EPAL pallet carries the EPAL brand mark, the IPPC plant-protection mark, a country code, the plant-protection authority's registration number, a heat-treatment code, and the mandatory EPAL control staple.
Only pallets with this complete marking are part of the European pallet exchange pool, where damaged or worn pallets can be swapped for intact ones. An unmarked pallet with identical dimensions, often called a generic or free Euro-pallet, is physically compatible but isn't part of this exchange system. Anyone who accepts such pallets can't simply trade them in for EPAL pallets later.
Beyond the pallet type, condition matters too. Rajapack.de summarizes the common quality grades:
Grade | Condition |
|---|---|
New | No signs of wear, light-colored wood, no splintering |
A | Light signs of use, minimal abrasion |
B | Visible use, darker wood, but structurally solid |
C | Foil residue, surface moisture, or slight block twisting possible |
Not usable | Heavily soiled, damp, missing parts, or illegible markings |
These quality grades are distinct from the pallet types (EPAL 1, 2, 3, and so on). The type describes dimensions and construction, the quality grade describes the condition of a specific pallet in circulation.
For imports from the Far East, it's worth checking before loading how goods are distributed across Euro-pallets, since that directly affects how many pallet slots fit in the container. How many pallets actually fit in a container also depends on whether the shipment fills a container alone or shares one.
In our sourcing projects with Far East suppliers, we routinely check whether the pallets used there actually meet the EPAL standard or are local load carriers with slightly different dimensions. Small dimensional deviations rarely affect container capacity during ocean freight, but they can cause problems once goods move onto European standard racking systems, if the pallet turns out a few centimeters too large or too small.
Anyone importing regularly should specify the pallet requirement in the supplier spec upfront, rather than sorting it out once the first shipment arrives. That matters especially when the goods need to fit into an existing warehouse or racking system built around EPAL dimensions. Well-planned procurement logistics accounts for details like this during the planning phase, not at goods receipt.
Prices typically range from about €8 to €15 for used pallets of medium quality, depending on grade, quantity, and market conditions. New EPAL pallets cost considerably more. The pallet market is subject to seasonal and regional price swings.
The regular safe working load is 1,500 kilograms per EPAL. Stacked on solid ground, the bottommost pallet may carry up to 5,500 kilograms total load. In high-bay racking, the allowable load drops to around 1,000 kilograms, since the deck is only supported at the edges there.
EPAL pallets carry a complete, protected marking with a brand mark, IPPC symbol, country code, and control staple, and are part of the European exchange pool. A generic pallet with the same dimensions is physically compatible but not part of that system.
Alongside the standard EPAL 1 (1,200 x 800 mm), there's EPAL 2 (1,200 x 1,000 mm), EPAL 3 (same dimensions as EPAL 1, different construction), and the half pallets EPAL 6 and EPAL 7 (800 x 600 mm).
The Euro-pallet is more than a piece of wood with fixed dimensions. Knowing its weight, load capacity, and the difference between genuine EPAL marking and a generic pallet avoids surprises in slot calculations, warehouse planning, and international pallet exchange.
Line Up factors pallet dimensions and load-carrier choice into your Far East import packaging specification from the start. 👉 Schedule a no-obligation consultation.
Your requirements are unique. So are our solutions. Let's talk about it.
Schedule a call →