
A spare part that would otherwise stop a production line in Germany costs many times more by air than by sea. Experienced buyers still choose the more expensive option in exactly that situation. The reason rarely comes down to the price per kilogram alone. It comes down to the full calculation behind it: time pressure, shipment value, and the cost of a production stoppage together decide whether the premium is worth paying.
In brief: Air freight from China to Europe currently costs around 3.60 to 4.90 USD per kilogram according to the Freightos Air Index (before surcharges), while ocean freight is roughly 6 to 12 times cheaper per cubic meter. Yet air freight accounts for about 26% of trade value but only 1 to 2% of trade weight in Germany's trade with non-EU countries, according to BDL. Whether the premium pays off depends on shipment value, weight, and your time window, not on the price per kilogram alone.
Air freight from China to Northern Europe currently costs around 3.60 to 4.90 USD per kilogram according to the Freightos Air Index, depending on the week, route and capacity. In the Freightos update of October 20, 2026, the rate stood at 3.87 USD per kilogram; in early September it was 4.88 USD according to DocShipper. The index reflects the pure air freight rate. Quotes for small shipments, express services or all-in prices with fuel and security surcharges are often well above it, which is why wider price ranges circulate online.
On the China lane specifically, the average trade value per tonne is 97,230 euros. That's actually below the national average of 147,183 euros, according to the BDL Air Freight Market Study 2026. China remains Germany's second-most important air freight trading partner overall, per the same study. Buyers who only compare the per-kilogram rate tend to underestimate the real cost, though. Fuel, security, and handling surcharges are added on top in practice almost every time.
In practice, the final invoice is rarely settled until after booking, because fuel and security surcharges fluctuate day to day. Buyers who calculate using the bare per-kilogram rate alone are regularly caught off guard when the final bill arrives.
Ocean freight is roughly 6 to 12 times cheaper per cubic meter than air freight. A cubic meter costs 35 to 120 euros by sea, compared to 400 to 900 euros by air. We show this in detail in our guide to ocean freight from China to Germany. For plannable shipments, ocean freight remains the more economical choice in almost every case.
The picture holds at the container level too. A 40-foot container on the Shanghai–Rotterdam route currently costs around 4,653 USD according to the Drewry World Container Index. That's regardless of the actual cargo weight within the payload limit. At a typical consolidated-cargo utilization of 20 to 25 tonnes, that works out to roughly 0.19 to 0.23 USD per kilogram. Actual utilization depends heavily on the cargo mix, though. Even accounting for that uncertainty, the gap to air freight remains enormous.
Air freight makes up only 1 to 2% of the weight in Germany's trade with non-EU countries. Measured by trade value, though, it's around 26%, out of a total trade volume of roughly 296 billion euros in 2024. That gap shows what air freight is actually used for: high-value goods whose value comfortably covers the transport cost, rarely bulk cargo.
On the Europe–Asia corridor, air cargo demand grew 10.3% year-on-year in 2025 according to IATA air cargo data. That's well above the global average of 3.4%. For German importers sourcing from East Asia, that means competition for cargo capacity on exactly this route is intensifying. It's already visible in the rate volatility of recent quarters.
The price gap between air freight and other transport modes comes down mainly to the average trade value per tonne that each mode typically carries. Per BDL data, that figure is 147,183 euros per tonne for air. For road it's 7,211 euros, and for sea and rail it's 3,232 euros each.
For buyers, this means air freight only pencils out when the value per kilogram is high enough, for electronics components, spare parts, or samples, for example. On top of that, airlines don't always bill by actual weight but by chargeable, or volumetric, weight. Under the IATA standard, that's calculated by dividing volume in cubic centimeters by 6,000. Bulky but lightweight goods can end up costing far more than their actual weight suggests.
Air freight pays off mainly when time pressure, shipment value, or an acute supply shortage justify the extra cost. The matrix below summarizes the key decision criteria:
Criterion | Air freight recommended | Ocean freight recommended |
|---|---|---|
Shipment value relative to weight | High, e.g. electronics, spare parts, samples | Low to medium, e.g. furniture, building materials, bulk goods |
Time window | Delivery required within days | Plannable, 3 to 5 weeks lead time available |
Shipment size | Small to medium, a few hundred kilograms | From a few cubic meters, especially at full-container volumes |
Recipient's stock buffer | Low, replenishment is critical | Sufficient buffer in place |
Budget per kilogram | Available | Limited |
If you ship smaller quantities regularly, it's also worth checking whether an LCL consolidated shipment beats air freight. With a lead time of about two to three weeks or more, it's almost always the cheaper alternative.
The break-even between the two transport modes is usually easier to pin down on a specific shipment than through a general rule of thumb. The table below shows three typical scenarios from procurement practice:
Scenario | Weight / volume | Air freight (indicative) | Ocean freight LCL (indicative) | Practical takeaway |
|---|---|---|---|---|
Urgent spare-part delivery | 80 kg / 0.3 CBM | approx. 290–390 USD | approx. 35–120 EUR (minimum billing, usually from 1 CBM) | Under a two-week window, air freight is usually the only option |
Sample collection | 25 kg / 0.1 CBM | approx. 90–120 USD | Forwarder's minimum charge is often similarly high | Air freight is often price-competitive on very small shipments |
Range replenishment | 1,200 kg / 8 CBM | approx. 4,300–5,900 USD | approx. 280–960 EUR | The cost gap widens sharply with volume; ocean freight clearly wins |
In our sourcing projects across the Far East, we repeatedly see the smallest category get underestimated. For sample shipments under 30 kilograms, ocean freight forwarders' minimum charges kick in so hard that the cost gap to air freight nearly disappears. Air freight ends up barely more expensive then, while being noticeably faster. Only once volumes reach several hundred kilograms or a few cubic meters does the calculation clearly tip toward ocean freight.
The table also shows that a genuine Total Cost of Ownership view needs to include more than the freight rate alone. Warehousing costs, the risk of a production stoppage, and capital tied up during transit all belong in the calculation too. Customs duties and import charges apply regardless of transport mode; how to correctly determine the customs value is covered in a dedicated article of ours.
Both transport modes have clear strengths, and in practice they usually complement each other rather than compete:
Criterion | Air freight | Ocean freight |
|---|---|---|
Transit time | Typically a few days | 25 to 35 days, China to Germany |
Cost per cubic meter | Significantly higher | Significantly lower |
Suitability for large volumes | Uneconomical | Very well suited |
Suitability for urgent needs | Very well suited | Not suitable |
Schedule reliability | High, fixed flight schedules | Moderate, port congestion and seasonal swings possible |
Climate footprint per shipment | Significantly higher | Significantly lower |
In practice, many importers deliberately combine both modes. The bulk of the product range travels by sea, while individual critical items, such as spare parts or the first samples of a new collection, are flown in separately.
Yes, and in practice this is common. The bulk of an order travels by sea, while individual urgently needed items are shipped separately by air. That way you get low per-unit costs and supply security together, instead of committing the entire shipment to one mode.
Airlines charge whichever is higher: the actual weight or the chargeable (volumetric) weight. The latter is calculated as volume in cubic centimeters divided by 6,000. For bulky but lightweight goods, the volumetric weight is usually what determines the price.
According to the Freightos Air Index, rates on the China–Northern Europe lane ranged from around 3.60 to 4.90 USD per kilogram in autumn 2026. Fuel and security surcharges come on top, and small shipments also face minimum charges.
At rates of 3.60 to 4.90 USD per kilogram, 100 kilograms costs roughly 360 to 490 USD. Surcharges and local handling are not included in that figure.
The high price comes from limited cargo capacity on passenger and freight aircraft, high energy use per tonne, and billing by chargeable (volumetric) weight. That last factor can make even light but bulky goods expensive.
The question is rarely which transport mode is fundamentally better, but which one fits the shipment at hand. Ocean freight remains the more economical choice for most plannable imports. Air freight covers the cases where time or supply security matter more than the price per kilogram.
Line Up supports buyers through exactly this decision. With over 30 years of experience sourcing from the Far East and our own office in China, we know when a given transport mode pays off for your shipment. We also know how to combine both sensibly within your sourcing process.
👉 Want to optimize transport costs and lead times for your next import? Schedule a no-obligation consultation with our process specialists.
Your requirements are unique. So are our solutions. Let's talk about it.
Schedule a call →

