
A 20ft container holds roughly ten Euro pallets in a single layer, a 40ft container about double that. Anyone who knows a shipment's pallet count but not the actual container dimensions ends up booking too much or too little load volume. That shows up directly in the freight cost.
In brief: Shipping containers are standardized worldwide under ISO 668. The two standard sizes, 20ft and 40ft, differ mainly in length, not in width or height. For extra load volume there's the High Cube container with a taller interior, for temperature-sensitive goods the reefer, and for oversized or top-loaded cargo the Open Top container. Which type and size fits depends on cargo volume, weight, and product type.
The most obvious difference is length. A 40ft container, at about 12.19 meters, is roughly twice as long as a 20ft container at about 6.06 meters. Width and height are nearly identical for both. That gives the 40ft container about double the load volume. It doesn't get double the allowable cargo weight, though, since the container's own tare weight increases with length too.
In our work planning FCL shipments from the Far East, we often see buyers default to the bigger container for bulky but lightweight goods. For heavy, compact goods, it usually pays to check the payload limit closely instead. Weight is often the limiting factor before volume ever becomes one.
Specification | 20ft Container | 40ft Container | 40ft High Cube |
|---|---|---|---|
External dimensions (L × W × H) | 6,058 × 2,438 × 2,591 mm | 12,192 × 2,438 × 2,591 mm | 12,192 × 2,438 × 2,896 mm |
Internal dimensions (approx., L × W × H) | 5,898 × 2,352 × 2,390 mm | 12,032 × 2,352 × 2,395 mm | 12,032 × 2,352 × 2,698 mm |
Volume | approx. 33 m³ | approx. 68 m³ | approx. 76 m³ |
Tare weight | approx. 2,200 kg | approx. 3,800 kg | slightly higher than standard 40ft |
Max. payload | approx. 25,800 to 28,000 kg | approx. 26,700 kg | comparable to standard 40ft |
Exact interior dimensions, volume, and weight figures can vary slightly by carrier and build year. The values above are typical reference figures for standard containers under ISO 668.
Loading Euro pallets (800 × 1,200 mm) in a single layer, roughly 10 to 11 pallets fit in a 20ft container and roughly 23 to 25 in a 40ft container. Stacking a second layer roughly doubles that count, provided the goods allow it and there's enough interior height.
Container type | Euro pallets, single layer | Euro pallets, double-stacked (if stackable) |
|---|---|---|
20ft container | approx. 10 to 11 | approx. 20 to 22 |
40ft container | approx. 23 to 25 | approx. 46 to 50 |
40ft High Cube | approx. 23 to 25 | approx. 46 to 50, more headroom when stacking |
These are reference figures for pure pallet loading with no gaps for cargo securing. In practice, one or two fewer pallets typically fit depending on securing method, pallet type, and packaging.
A High Cube container has the same footprint as a standard container. It's about 30 centimeters taller externally, though, at roughly 2.90 meters instead of 2.59 meters. That raises a 40ft container's interior volume from about 68 to about 76 cubic meters. The space it occupies in port or on the vessel doesn't change. The 40ft High Cube has become the most commonly used container variant in international ocean freight for voluminous but not excessively heavy cargo.
In sourcing, we often see buyers assume a High Cube container is automatically the more economical choice. It offers more volume per container, after all. That's only true if the cargo is actually voluminous rather than heavy. With dense, heavy goods, the weight limit gets hit first anyway, before the High Cube's extra space ever gets used.
A reefer container is a container with a built-in refrigeration unit. It can hold temperatures of roughly -25°C to +30°C depending on the model, with newer units reaching as low as -40°C. It's used whenever cargo needs a defined temperature maintained throughout transport, such as food, pharmaceuticals, or certain chemicals. Unlike a standard container, it needs a continuous power supply for the entire journey. That means power on board the vessel, at the port, and during pre- and on-carriage by truck.
For cost planning, it matters that reefer containers reportedly cost roughly two to three times as much to acquire as a comparable standard container. That feeds through into higher charter rates and freight quotes. On top of that comes the ongoing power draw for refrigeration. It also requires an uninterrupted power connection throughout the journey, at the port as much as during pre- and on-carriage. Anyone planning temperature-controlled cargo should build that premium into the freight cost calculation from the start. It shouldn't be a surprise once the carrier's quote arrives.
An Open Top container has a roof made of removable bows and a tarpaulin instead of a fixed steel roof. That lets cargo be loaded from above by crane once the roof is opened. That suits general cargo that's either too tall for a standard container's door opening or is simply more practical to load from above. Length, width, and floor space otherwise match the standard container of the same size.
Open Top containers are available from carriers in far smaller numbers than standard containers, which directly affects both availability and price. If cargo extends above the side wall, carriers charge an additional overhang surcharge and typically require prior approval. That's because the cargo then intrudes into the space of a neighboring slot. So-called out-of-gauge cargo means goods that extend beyond the container's regular outline. For it, surcharges of $200 to $800 or more per shipment are common on top of the base rate.
A flat rack container has no side walls or roof, just a floor and fixed or foldable end walls. That makes it suitable for overwidth, overlength, or extremely heavy cargo. Machinery, vehicles, or steel structures that wouldn't fit even in an Open Top container are typical examples. Cargo is loaded from above or the side and is typically lashed directly to the flat rack's floor rather than placed inside an enclosed space.
Since cargo on a flat rack can almost always extend sideways or upward beyond the container's own outline, the same out-of-gauge surcharges apply as with Open Top containers. These are often compounded by a so-called lost-slot premium. If the cargo intrudes into a neighboring slot, the carrier loses that slot and bills the customer accordingly. Flat racks only make sense for cargo that genuinely doesn't fit into a standard or Open Top container, not as a more convenient alternative to one.
Four factors together determine the right choice in practice:
Factor | Why it matters |
|---|---|
Cargo volume | Decides between 20ft, 40ft, and High Cube |
Cargo weight | Can limit payload before volume is ever maxed out |
Temperature requirement | Decides whether a reefer is needed, including its cost premium |
Cargo shape and height | Decides whether an Open Top or flat rack container is needed, with the corresponding surcharges |
Anyone importing regularly from the Far East should ideally factor the container choice into the order quantity itself. Much like the decision between FCL and LCL, it pays to look at the actual cargo volume before a container gets booked. The accompanying freight documents, especially the bill of lading, list the chosen container type and container number explicitly anyway.
A 20ft container is externally about 6.06 meters long, 2.44 meters wide, and 2.59 meters tall. That gives roughly 33 cubic meters of interior load volume.
A 40ft container is externally about 12.19 meters long, at the same width and height as the 20ft container. Interior volume is roughly 68 cubic meters, or roughly 76 cubic meters for the High Cube variant.
Loading Euro pallets in a single layer, roughly 10 to 11 pallets fit in a 20ft container. Double-stacked, that's roughly double, provided the goods and interior height allow it.
An empty 20ft container typically weighs about 2,200 kilograms, and an empty 40ft container about 3,800 kilograms. These figures can vary slightly by carrier and build year.
The High Cube container has the same footprint as the standard container but is about 30 centimeters taller. That significantly increases interior volume without requiring any extra floor space.
The right container choice comes down to cargo volume, weight, and, where relevant, temperature requirements. Sorting out these factors before booking avoids both overpaying for a half-empty container and overloading one.
Line Up supports buyers in planning FCL shipments from the Far East and choosing the right container type for their cargo. 👉 Schedule a no-obligation consultation and find out which container your next shipment actually needs.
Your requirements are unique. So are our solutions. Let's talk about it.
Schedule a call →